Whether you are buying a home in Canada, selling, or renovating, knowing how to accurately calculate square footage is essential.
Accurate square footage affects your home’s appraisal and resale value. Learn more in our property types guide and see how square footage factors into how much house you can afford.
How to measure square footage
Step-by-step method
| Step | What to Do |
|---|---|
| 1. Gather tools | Tape measure (or laser measure or smartphone app), paper, calculator |
| 2. Sketch a floor plan | Draw a rough outline of each floor |
| 3. Measure each room | Measure length and width in feet |
| 4. Calculate each room | Length × width = square footage |
| 5. Handle irregular shapes | Break into rectangles, calculate each, and add together |
| 6. Add all rooms | Sum all room areas for total square footage per floor |
| 7. Add all floors | Sum each floor’s total (above-grade only for primary figure) |
Measurement example
| Room | Length (ft) | Width (ft) | Square Footage |
|---|---|---|---|
| Living room | 18 | 14 | 252 |
| Kitchen | 14 | 12 | 168 |
| Dining room | 12 | 10 | 120 |
| Primary bedroom | 16 | 14 | 224 |
| Bedroom 2 | 12 | 11 | 132 |
| Bedroom 3 | 11 | 10 | 110 |
| Primary bathroom | 10 | 8 | 80 |
| Bathroom 2 | 8 | 6 | 48 |
| Hallways / closets | — | — | 120 (estimated) |
| Main floor total | 1,254 sq ft |
Handling irregular rooms
For L-shaped, T-shaped, or angled rooms:
- Break the room into rectangular sections
- Measure each rectangle separately
- Add the rectangles together
Example: L-shaped living room
- Section A: 14 ft × 10 ft = 140 sq ft
- Section B: 8 ft × 6 ft = 48 sq ft
- Total: 188 sq ft
What counts as livable square footage
| Space | Counts? | Notes |
|---|---|---|
| Living room, bedrooms, kitchen | ✅ Yes | Standard livable space |
| Bathrooms | ✅ Yes | Included in total |
| Hallways and closets | ✅ Yes | Part of the interior |
| Finished above-grade rooms | ✅ Yes | Must have proper ceiling height |
| Finished basement | ⚠️ Separate | Reported separately — not in primary sq ft |
| Unfinished basement | ❌ No | Not livable space |
| Garage | ❌ No | Not livable space |
| Enclosed porch / sunroom | ⚠️ Depends | Only if heated and finished to residential standard |
| Attic | ⚠️ Depends | Only if finished with 7+ ft ceiling |
| Exterior spaces (deck, balcony) | ❌ No | Not interior space |
| Under stairs | ❌ No | Unless usable height (typically not) |
Measuring tools
| Tool | Accuracy | Cost | Best For |
|---|---|---|---|
| Tape measure (25+ ft) | High | $10–$25 | Small rooms, precise measurements |
| Laser distance measure | Very high | $40–$150 | Fast, accurate, one-person operation |
| Smartphone measure app | Moderate | Free | Quick estimates, convenience |
| Measuring wheel | High | $30–$60 | Large spaces, outdoor areas |
| Professional appraiser | Highest | $300–$500 | Official measurements for transactions |
Square footage by property type
How different property types are measured
| Property Type | What’s Measured | Notes |
|---|---|---|
| Detached house | Exterior wall measurements, all above-grade floors | Basement reported separately |
| Semi-detached | Same as detached — your half only | Shared wall to centre point |
| Townhouse (freehold) | Same as detached | Shared walls to centre point |
| Condo | Interior measurements (inside the walls) | Per condo declaration — may differ from exterior |
| Condo townhouse | Interior measurements | As per declaration schedule |
Interior vs exterior measurement
| Method | Used For | Difference |
|---|---|---|
| Exterior (outside wall to outside wall) | Detached, semi, freehold townhouse | Larger figure — includes wall thickness |
| Interior (inside wall to inside wall) | Condos | Smaller figure — excludes walls |
| Typical difference | Exterior is ~5%–10% larger than interior |
Price per square foot
| City | Condo ($/sq ft) | Detached ($/sq ft) |
|---|---|---|
| Toronto | $700–$1,200 | $500–$900 |
| Vancouver | $800–$1,400 | $600–$1,100 |
| Calgary | $350–$550 | $300–$450 |
| Ottawa | $400–$600 | $300–$500 |
| Montreal | $400–$650 | $300–$500 |
| Edmonton | $300–$450 | $250–$400 |
| Winnipeg | $250–$400 | $200–$350 |
| Halifax | $350–$550 | $250–$400 |
Price per square foot is useful for comparing similar properties — but always consider location, condition, and lot size as well.
Common mistakes
| Mistake | How to Avoid |
|---|---|
| Including the basement in primary sq ft | Always list basement separately |
| Including the garage | Garages are never livable space |
| Not measuring walls and closets | Include hallways, closets, and wall thickness (for exterior method) |
| Relying on property tax records | Tax records can be inaccurate — verify by measuring |
| Comparing condo (interior) to house (exterior) | Know which method was used before comparing |
| Ceiling height issues | Spaces below 7 ft ceiling do not count |
| Rounded or estimated measurements | Measure precisely — rounding errors compound |
Why square footage matters
| Use Case | Why It Matters |
|---|---|
| Buying | Verify listed size; compare price per sq ft between properties |
| Selling | Accurate sq ft supports your listing price and builds buyer confidence |
| Appraising | Appraisers use sq ft for comparable analysis — errors affect valuation |
| Renovating | Accurate floor plans needed for material estimates and permits |
| Insurance | Replacement cost is partially based on square footage |
| Property tax | Assessments factor in livable area |